As soon as a person gets their scooter, their first instinct is to ride it and ride it faster. Riding a moped is thrilling and wanting to increase its pace is natural for you to want. A moped is a type of small motorcycle or a scooter that does not exceed 50cc’s. That is why 50cc scooters are usually termed moped.
Its pace also cannot exceed about 30 miles per hour on a flat surface. They are equipped with a power drive system which is an automatic-gearing system, so you will not have to manually shift gears.
If you are here to look for how to make a moped faster? , you are in luck, because in this article, we will be looking at some of the common ways to increase a moped’s speed. We will also have a look at some of the most commonly asked questions regarding increasing a moped’s speed. So, without wasting any more time, let’s get to the gist!
Is it Legal to Increase a Moped’s Speed?
While you do not need to have a driver’s license if your moped doesn’t go faster than 30 miles per hour, having a driver’s license, operator’s license or motorcycle license is mandatory. Without a license, it is illegal to drive your moped at a pace higher than 30 miles per hour.
Making a 50cc Moped Faster
If you have a 50cc moped, it might be restricted to 30 miles per hour by its manufacturer, as are the regulations for people without a driver’s license. If so, you will have to derestrict your moped. Your moped will be restricted by three things:
- The CDI, or the ignition module, limits the engine rpm. Generally, a 50cc moped is restricted to about 7000 rpm.
- The Variator, which has an oversized boss that limits the pace by not allowing the full ratio of gears
- The Carburetor Jet, which is small and limits fuel flow. This is also done to reduce emissions and meet the laws regarding gas emissions.
All you will have to do is remove these restrictions. You could do this either by the dealer of the moped or the owner from which you are buying the moped. Removing these restrictions will increase the speed of your moped to about 40 miles per hour. Meanwhile, you will not have to spend much at all, as this would cost you only around $5 to $35. If you are buying it from a dealer, they may just remove these restrictions by themselves.
The CDI could be replaced, or surgery could be done on the stock module. This will allow you to run the engine at a higher rpm. Meanwhile, removing the variator boss will provide a higher gear and increase the maximum speed. Lastly, installing a larger carburetor jet will give you the best and smoothest performance. However, it may consume a little more fuel than a moped usually does.
Our focus in this article was “How to Make a Moped Faster?”. Moped or 50cc scooters are awesome to ride on. Just make sure to be heedful of the safety precautions if you are removing the restrictions yourself. It is also advisable to wear safety gear while riding your moped at high speeds. Lastly, I would love to hear back from you about your experiences with your moped!